Aeroglaze® 9958 thinner is used to reduce viscosities of Aeroglaze wash primers and Aeroglaze polyurethane coatings for spray applications.
Unit of Measure

Approvals and Conformities

Approvals and Conformities

N/A ADCOLE - A26364
BAE Systems - 8357819
Ball Aerospace & Technologies - BMS29.98
Cincinatti Electronics - 6350909-1
Cytec Solvey - LMS13633
Us Air Force - 0N814850-2
Dept of Navy - JCM-14352-002
Harris - 2003693
Honeywell - P8251333
ITT, Space Systems - 400-3093-304
L3 Communications - B185239, B185331-006, N500049
Loral - LMS 70412
MPC Products - 9999958261-1, MIL-T-81772
REMEC - 504410
Schaffer Magnetics - SMS-803
Swales Aerospace - SAI-SPEC-936
Yardney Technical Products - YEC-2191A

Typical Properties


N/A Clear or Straw Yellow Liquid


N/A 0.88 to 0.89 kg/L7.35 to 7.45 lb/gal

Test Method for Density

N/A American Society for Testing and Materials (ASTM D 1475-85)

Flash Point (Seta) Closed Cup Temperature

N/A 5 ºC41 ºF

Test Method for Flash Point (Seta) Closed Cup Temperature

N/A American Society for Testing and Materials (ASTM D 3278-82)

Volatile Organic Compounds (VOC) Volume

N/A 887 g/L7.4 lb/gal

Test Method for Volatile Organic Compounds (VOC)

N/A American Society for Testing and Materials (ASTM D 3960-87)


Note for Typical Properties

N/A Data is typical and not to be used for specification purposes.


Features and Benefits

  • Improves Application: when used in Aeroglaze primers or coatings, improves flow properties for spray application and provides better control of application film thickness.
  • MIL-T-81772 Type I Compliant: meets requirements of Military Specification MIL-T-81772 Type I thinner.

Directions for Use


N/A Premix Aeroglaze primer or coating before adding thinner. Refer to appropriate data sheet for primer or coating mixing instructions.

Slowly add Aeroglaze 9958 thinner, 15-20% by volume, while stirring the mixed primer/coating.

Precautions for Use and Storage

Precautions for Use and Storage

N/A Shelf life is one year from date of shipment when stored in a dry, well ventilated area at 16 ºC (60 ºF) in original, unopened containers. Do not store or use near heat, sparks or open flame.

Before using this or any SOCOMORE product, refer to the Material Safety Data Sheet (MSDS) and label for safe use and handling instructions.

For industrial/commercial use only. Must be applied by trained personnel only. Not to be used in household applications. Not for consumer use.

Manufactured for SOCOMORE by: LORD Corporation, Saegertown, PA