Medium-Density, Two-Component Edge and Void Fillers
Light-tan epoxy edge filler that maintains good physical performance characteristics at elevated temperatures of up to 350 ºF (177 ºC) after curing at 77 ºF (25 ºC). Used for core splicing and strengthening radii and corners in reinforced plastic structures.
Light-tan epoxy edge filler that maintains good physical performance characteristics at elevated temperatures of up to 350 ºF (177 ºC) after curing at 77 ºF (25 ºC). Used for core splicing and strengthening radii and corners in reinforced plastic structures.
Unit of Measure
Typical Properties
Original Equipment Manufacturer (OEM) Specifications |
N/A Grumman GM 4006, Ty 1, Cl B FM 1, REV B / Vought VM 4006, Ty 1, CLD FM1 Pratt and Whitney CPW 505 REV D |
Consistency at 77 Degree Fahrenheit (ºF) Temperature |
N/A Paste |
Gel Time at 77 Degree Fahrenheit (ºF) Temperature |
N/A 50-90 (100 gram mass) minutes |
Mix Ratio by Weight (R:H) |
N/A 100:12 |
Suggested Cure Schedule Fahrenheit (ºF) |
N/A 7 days at 77 ºF or 2-3 hrs at 150 ºF |
Maximum Service Temperature |
N/A 350 ºF |
Compressive Strength at 77 Fahrenheit (ºF) |
N/A 8000 psi |
Flame Retardant |
N/A No |
Packaging |
N/A Working packs |
