Request Information
Low-Density, Two-Component Edge and Void Fillers

Flame-retardant, extrudable off-white epoxy edge and void filler with high compressive strength. Used for honeycomb reinforcement including fastener potting and edge filling. Satisfies the requirements of FAR 25.853 60-second vertical ignition.
Unit of Measure

Typical Properties

Original Equipment Manufacturer (OEM) Specifications

 N/A Huntsman standard certification

Consistency at 77 Degree Fahrenheit (ºF) Temperature

 N/A Paste

Gel Time at 77 Degree Fahrenheit (ºF) Temperature

 N/A 12-25 (56.5 gram mass) minutes

Mix Ratio by Weight (R:H)

 N/A 100:13

Suggested Cure Schedule Fahrenheit (ºF)

 N/A 24 hrs at Room Temp or 5 hrs at 120 ºF

Maximum Service Temperature

 N/A Not Determined

Compressive Strength at 77 Fahrenheit (ºF)

 N/A 7600 psi

Flame Retardant

 N/A Yes

Packaging

 N/A Working packs

Specifications

Density

 N/A 0.70 g/cm³

Color

 N/A Off-White