Ultra-Low Density, Two-Component Edge and Void Fillers
Trowellable and extrudable pale yellow epoxy paste with good compressive strength that can be sanded or machined after a room-temperature cure. Used for honeycomb edge reinforcing.
Trowellable and extrudable pale yellow epoxy paste with good compressive strength that can be sanded or machined after a room-temperature cure. Used for honeycomb edge reinforcing.
Unit of Measure
Typical Properties
Original Equipment Manufacturer (OEM) Specifications |
N/A Boeing BMS 5-28, Ty 28, REV AN / TriumphTEC-M-20710-6, Ty 1, REV B |
Consistency at 77 Degree Fahrenheit (ºF) Temperature |
N/A Paste |
Gel Time at 77 Degree Fahrenheit (ºF) Temperature |
N/A 65 (62.5 gram mass) minutes |
Mix Ratio by Weight (R:H) |
N/A 100:25 |
Suggested Cure Schedule Fahrenheit (ºF) |
N/A 7 days at 77 ºF or 5 hrs at 125 ºF |
Maximum Service Temperature |
N/A Not Determined |
Compressive Strength at 77 Fahrenheit (ºF) |
N/A 2800 psi |
Flame Retardant |
N/A Yes |
Packaging |
N/A Working packs |
