Request Information
3M™ Scotch-Weld™ Structural Adhesive EC-3587 B/A Gray is a two-part polyurethane that cures at room temperature or with heat to a tough, impact-resistant material. It has excellent adhesion to many metal and plastic substrates. It can be used as structural adhesive, void filler, or as a fairing compound.
Unit of Measure

Specifications

Brands

 N/A 3M™ Scotch-Weld™

Product Description

Type

 N/A Part B (Base)

Class

 N/A Class B-1/4

Consistency

 N/A Viscous Paste

Color

 N/A Gray

Weight/Gallon

 N/A 6.3 to 7.7 lb

Solids

 N/A 100 %

Mix Ratio by Weight

 N/A 100

Mix Ratio by Volume

 N/A 175

Work Life at 72 ± 3 Degree Fahrenheit (ºF) Temperature (100 Gram (g) Mixed)

 N/A 5 to 20 Minutes

Flow per Mil-S-8802, Figure 1 (Mixed)

 N/A 0.1 in0.25 cm

Shore D Hardness (Cured)

 N/A 62

Note for Product Description

 N/A The following technical information and data should be considered representative or typical only and should not be used for specification purposes.

Advantages

Advantages

 N/A
  • Sandable structural adhesive
  • Excellent void or gap filler
  • Excellent fairing compound
  • Base and Accelerator are contrasting colors
  • Mixed material can be easily extruded from plastic cartridges
  • Non-sag when mixed

Storage Stability

Storage Stability

 N/A Store this product indoors in a dry place at 60-80 ºF (16-27 ºC) for the maximum shelf life. If properly stored in its original unopened containers, the 3M™ Standard shelf life is 6 months from date of shipment from 3M™.

Part A (Accelerator) and Part B (Base) will absorb moisture which may be present in the atmosphere. Store in tightly closed containers at all times in order to prevent skin formation and porous bondlines.

Important Notice

Important Notice

 N/A 3M™ MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. User is responsible for determining whether the 3M™ product is fit for a particular purpose and suitable for user’s method of application. Please remember that many factors can affect the use and performance of a 3M™ Adhesives Division product in a particular application. The materials to be bonded with the product, the surface preparation of those materials, the product selected for use, the conditions in which the product is used, and the time and environmental conditions in which the product is expected to perform are among the many factors that can affect the use and performance of a 3M™ product. Given the variety of factors that can affect the use and performance of a 3M™ product, some of which are uniquely within the user’s knowledge and control, it is essential that the user evaluate the 3M™ product to determine whether it is fit for a particular purpose and suitable for the user’s method of application.

Limitation of Remedies and Liability

Limitation of Remedies and Liability

 N/A If the 3M™ product is proved to be defective, THE EXCLUSIVE REMEDY, AT 3M™’S OPTION, SHALL BE TO REFUND THE PURCHASE PRICE OF OR TO REPAIR OR REPLACE THE DEFECTIVE 3M™ PRODUCT. 3M™ shall not otherwise be liable for loss or damages, whether direct, indirect, special, incidental, or consequential, regardless of the legal theory asserted, including, but not limited to, negligence, warranty, or strict liability.

Note

Note

 N/A This Adhesives Division product was manufactured under a 3M™ quality system registered to ISO 9002 standards.