3M™ Scotch-Weld™ Structural Adhesive Primer EW-5005 is a water-based, non-chromated, corrosion-inhibiting structural adhesive primer.
Unit of Measure
Specifications
|
Typical Uncured Physical Properties
|
Key Specifications
|
Primer Dry and Cure
|
Primer Thickness
|
Technical Information
|
Product Use
|
Warranty, Limited Remedy, and Disclaimer
|
Limitation of Liability
|
Benefits
Typical Uncured Physical Properties
Color |
N/A Green |
Base |
N/A Epoxy |
Vehicle |
N/A Distilled water and organic co-solvents |
Solids Content |
N/A 20 % |
Tolerance for Solids Content (±) |
N/A 2 % |
Net Weight |
N/A 8.7 lb/gal1.04 g/cc |
Storage |
N/A 35 to 45 ºF (1 to 7 ºC) [DO NOT FREEZE] |
Note |
N/A The following technical information and data should be considered representative or typical only and should not be used for specification purposes. |
Key Specifications
Appearance |
N/A Glossy to Semi-Glossy |
Air Dry Tack |
N/A None |
Pencil Hardness |
N/A >7H |
Minimum Thickness to MEK Resistance1 | N/A 0.10 to 0.14 mil2.5 to 3.6 µ |
Primer Dry and Cure
Air-Dry at 75 ± 5ºF (24 ± 3ºC) |
N/A 30 minutes |
Cure at 250 ± 5ºF (121 ± 3ºC) |
N/A 60 minutes |
Technical Information
Technical Information |
N/A The technical information, guidance, and other statements contained in this document or otherwise provided by 3M™ are based upon records, tests, or experience that 3M™ believes to be reliable, but the accuracy, completeness, and representative nature of such information is not guaranteed. Such information is intended for people with knowledge and technical skills sufficient to assess and apply their own informed judgment to the information. No license under any 3M™ or third party intellectual property rights is granted or implied with this information. |
Product Use
Product Selection and Use |
N/A Many factors beyond 3M™s control and uniquely within user’s knowledge and control can affect the use and performance of a 3M™ product in a particular application. As a result, customer is solely responsible for evaluating the product and determining whether it is appropriate and suitable for customer’s application, including conducting a workplace hazard assessment and reviewing all applicable regulations and standards (e.g., OSHA, ANSI, etc.). Failure to properly evaluate, select, and use a 3M™ product and appropriate safety products, or to meet all applicable safety regulations, may result in injury, sickness, death, and/or harm to property. |
Warranty, Limited Remedy, and Disclaimer
Warranty, Limited Remedy, and Disclaimer |
N/A Unless a different warranty is specifically stated on the applicable 3M™ product packaging or product literature (in which case such warranty governs), 3M™ warrants that each 3M™ product meets the applicable 3M™ product specification at the time 3M™ ships the product. 3M™ MAKES NO OTHER WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OR CONDITION OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR ARISING OUT OF A COURSE OF DEALING, CUSTOM, OR USAGE OF TRADE. If a 3M™ product does not conform to this warranty, then the sole and exclusive remedy is, at 3M™’s option, replacement of the 3M™ product or refund of the purchase price. |
Limitation of Liability
Limitation of Liability |
N/A Except for the limited remedy stated above, and except to the extent prohibited by law, 3M™ will not be liable for any loss or damage arising from or related to the 3M™ product, whether direct, indirect, special, incidental, or consequential (including, but not limited to, lost profits or business opportunity), regardless of the legal or equitable theory asserted, including, but not limited to, warranty, contract, negligence, or strict liability. |
Benefits
Benefits |
N/A
|
- 1 Tested according to ASTM D5402.