High-Density, One-Component Frozen Edge and Void Fillers
High-performance, extrudable gray epoxy edge and void filler with outstanding compressive strength at temperatures of up to 350 ºF (177 ºC). Designed for fabricating and reinforcing composite structures.
High-performance, extrudable gray epoxy edge and void filler with outstanding compressive strength at temperatures of up to 350 ºF (177 ºC). Designed for fabricating and reinforcing composite structures.
Unit of Measure
Typical Properties
Original Equipment Manufacturer (OEM) Specifications |
N/A Boeing BMS 5-28, Ty 27, REV AN / Airbus/Coasa RP1021209 ISS 2 |
Consistency at 77 Degree Fahrenheit (ºF) Temperature |
N/A Extrudable paste |
Gel Time at 77 Degree Fahrenheit (ºF) Temperature |
N/A 24 hrs after thaw minutes |
Suggested Cure Schedule Fahrenheit (ºF) |
N/A 1hr at 350 ºF |
Maximum Service Temperature |
N/A 350 ºF |
Compressive Strength at 77 Fahrenheit (ºF) |
N/A 30000 psi |
Flame Retardant |
N/A No |
Packaging |
N/A 6 oz and 32 oz cartridges and patties |