Low-Density, Two-Component Edge and Void Fillers
Flame-retardant, low-flow, extrudable, off-white epoxy edge and void filler with good compressive strength that cures at room temperature. Suitable for insert potting in honeycomb structures.
Flame-retardant, low-flow, extrudable, off-white epoxy edge and void filler with good compressive strength that cures at room temperature. Suitable for insert potting in honeycomb structures.
Unit of Measure
Typical Properties
Original Equipment Manufacturer (OEM) Specifications |
N/A Boeing BMS 5-28, Ty 18, Cl 1, REV AN |
Consistency at 77 Degree Fahrenheit (ºF) Temperature |
N/A Paste |
Gel Time at 77 Degree Fahrenheit (ºF) Temperature |
N/A 15 (57 gram mass) minutes |
Mix Ratio by Weight (R:H) |
N/A 100:14 |
Suggested Cure Schedule Fahrenheit (ºF) |
N/A 7 days at Room Temp or 5 hrs at 125 ºF |
Maximum Service Temperature |
N/A Not Determined |
Compressive Strength at 77 Fahrenheit (ºF) |
N/A 5000 psi |
Flame Retardant |
N/A Yes |
Packaging |
N/A 6 oz Semkits®, working packs and pail kits |