Medium-Density, One-Component Frozen Edge and Void Fillers
Thixotropic, reddish-brown structural epoxy edge and void filler with high-compressive strength. Requires an elevated temperature cure. Used for reinforcing honeycomb core and panel edges for high-service temperatures. Also available as a Eposert™ pre-cured insert.
Thixotropic, reddish-brown structural epoxy edge and void filler with high-compressive strength. Requires an elevated temperature cure. Used for reinforcing honeycomb core and panel edges for high-service temperatures. Also available as a Eposert™ pre-cured insert.
Unit of Measure
Typical Properties
Original Equipment Manufacturer (OEM) Specifications |
N/A For complete list please see page 14 |
Consistency at 77 Degree Fahrenheit (ºF) Temperature |
N/A Extrudable paste |
Gel Time at 77 Degree Fahrenheit (ºF) Temperature |
N/A 8 hrs after thaw minutes |
Suggested Cure Schedule Fahrenheit (ºF) |
N/A 1 hr at 350 ºF or 1.5 hrs at 250 ºF |
Maximum Service Temperature |
N/A 350 ºF |
Compressive Strength at 77 Fahrenheit (ºF) |
N/A 14500 psi |
Flame Retardant |
N/A Yes |
Packaging |
N/A 6 oz, 12 oz and 20 oz cartridges and patties |
